Backflow Testing

Backflow Assembly Testing Special:   Recently your Water District may have requested that you have your backflow assembly for your landscape sprinkler system tested.  We specialize in landscape sprinkler repair and backflow testing and consequently we stock all the most common replacement parts needed to repair approved 1” double check valves. To qualify, the assembly must be a 1” state approved double check valve located outside. About 90% of residential systems meet these requirements. The service includes testing the unit, repairing the unit if necessary, retesting the unit if necessary, sending a copy of the results to your water district, and sending you a copy of the results with your bill. Parts are an additional cost if required but labor is free as long as assembly excavation or assembly rotation is not required.  Because of the poor design, we may at our discretion exclude the Watts 775 from our test special. To sign up, simply call us with your name, address and phone number and you’re done.  Most backflow assemblies are located outside next to your water meter so an appointment is usually not necessary since we don’t need to meet you. If we’re unable to answer leave a message and we’ll call you back with a scheduled date – usually within the week.  Pricing is below, for groups of more than 10 we require a person to coordinate the group. The coordinator needs to supply us with the name, address, email address and phone number of each participant. The coordinator is subject to further discounts or a free test. For assemblies located where owner access is required add $10.00 to the testing cost.  Waive the additional indoor cost if you have 2 or more assemblies.  The cost of this service does not include filling your sprinkler system with water and checking it for leaks.  We also provide a turn on water service and a several types of sprinkler tune-ups – see more information below


Test 1 unit existing     $54.95       1” DCV Landscape sprinkler located outside

Test 1 unit existing     $74.95       1” DCV (Single indoor assembly only) 

Test 2-10 units           $44.95*      *assuming units are in same neighborhood or property

Test > 10                  $37.95        Coordinated rate for groups >10